Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
BEND and more GmbH
Steinenfeldweg 7,
73312
Geislingen
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
SPORTELLI.TECH
Location
Hall map
Fairground map
Our range of products
Product categories
- 02 Processing machinery for metallic tubes and pipes
- 02.02 Tube forming lines
- 02.02.01 Tube bending machines
Tube bending machines
Our products
Product category: Tube bending machines
ALL-ELECTRIC CNC TUBE BENDING MACHINES
Our all-electric tube bending machines are CNC machines from the Italian manufacturer SPORTELLI from Bassano del Grappa (Italy), for whom we act as general importer in Germany.
In the development of these mandrel bending machines, there has been a trend for years towards fully electric machines with digital technology. Hydraulic components are only available as an option in the smaller models, if at all (for example for punching or the closing movement of already existing split bending templates).
Due to the booster capability of the feed carriage, the linear mandrel bending machines are capable of bending smaller and smaller radii. Due to the design (bending head on cross slide), the machines can be used as single-radius machine, multi-radius machine and also as right-left machine. In addition to rotary draw bending, free-form bending can also be performed. We offer all machines from the "stand-alone" solution to the complete production island.
These linear mandrel bending machines cover the following tube diameter range:
eDS 25 : max. bending capacity: D. 25 x 2 mm
eDS 45 : max. bending capacity: D. 45 x 3 mm
eDS 65 : max. bending capacity: D. 65 x 3 mm
All machines are equipped with the manufacturer's own MARCO POLO PC-based software. An intuitive control concept that serves the operator in the simplest way for program design and machine operation.
In the development of these mandrel bending machines, there has been a trend for years towards fully electric machines with digital technology. Hydraulic components are only available as an option in the smaller models, if at all (for example for punching or the closing movement of already existing split bending templates).
Due to the booster capability of the feed carriage, the linear mandrel bending machines are capable of bending smaller and smaller radii. Due to the design (bending head on cross slide), the machines can be used as single-radius machine, multi-radius machine and also as right-left machine. In addition to rotary draw bending, free-form bending can also be performed. We offer all machines from the "stand-alone" solution to the complete production island.
These linear mandrel bending machines cover the following tube diameter range:
eDS 25 : max. bending capacity: D. 25 x 2 mm
eDS 45 : max. bending capacity: D. 45 x 3 mm
eDS 65 : max. bending capacity: D. 65 x 3 mm
All machines are equipped with the manufacturer's own MARCO POLO PC-based software. An intuitive control concept that serves the operator in the simplest way for program design and machine operation.
Product category: Tube bending machines
CNC TUBE BENDING MACHINES
The CNC tube bending machines of STARGROUP from Provaglio d'Iseo, Italy, for whom we are the exclusive partner in Germany, are characterized by their solid basic structure and the use of brand components.
The tube bending machines are offered in a slightly lighter EvoBend series and in the heavier HeavyBend series. These are called Hydrid machines because the machine is built with ELECTRICAL AXLES and with HYDRAULIC CLOSING MOVEMENTS, while the FullBend series has no hydraulics at all. Also due to the booster capability of the feed carriage, these linear mandrel bending machines are capable of bending smaller radii and, combined with their solid basic structure, are also suitable for industrial production use. The modular design also allows the machine to be individually configured as a single-radius machine, or as a multi-radius machine that can be selected as either a right- or left-hand bending machine. In addition to rotary draw bending, free-form bending can also be performed.
The series of Startechnology:
EvoBend: with bending capacities from max. D. 25 x 3 mm to D. 80 x 5 mm
FullBend: with bending capacities from max. D. 25 x 3 mm to D. 150 x 8 mm
HeavyBend: with max. bending capacities from D. 90 x 5 mm to D. 150 x 8 mm
All machines are equipped with the PC-based S.T.I. software developed by the manufacturer itself: a control software with simple intuitive interface with complete real simulation of the bending cycle.
The tube bending machines are offered in a slightly lighter EvoBend series and in the heavier HeavyBend series. These are called Hydrid machines because the machine is built with ELECTRICAL AXLES and with HYDRAULIC CLOSING MOVEMENTS, while the FullBend series has no hydraulics at all. Also due to the booster capability of the feed carriage, these linear mandrel bending machines are capable of bending smaller radii and, combined with their solid basic structure, are also suitable for industrial production use. The modular design also allows the machine to be individually configured as a single-radius machine, or as a multi-radius machine that can be selected as either a right- or left-hand bending machine. In addition to rotary draw bending, free-form bending can also be performed.
The series of Startechnology:
EvoBend: with bending capacities from max. D. 25 x 3 mm to D. 80 x 5 mm
FullBend: with bending capacities from max. D. 25 x 3 mm to D. 150 x 8 mm
HeavyBend: with max. bending capacities from D. 90 x 5 mm to D. 150 x 8 mm
All machines are equipped with the PC-based S.T.I. software developed by the manufacturer itself: a control software with simple intuitive interface with complete real simulation of the bending cycle.
Product category: Tube bending machines
PIPE END FORMING MACHINES
Our pipe end processing machines are machines of the Italian manufacturer SPORTELLI.tech from Bassano del Grappa (Italy), for whom we act as general importer in Germany.
Over the years, these machines have evolved from simple pipe end presses that run "on block" to axis-controlled processing machines. These machines of the eFX series then also offer more possibilities than just chipless forming of the tube ends. Forming, roller burnishing, cutting of excess lengths, milling, drilling, thread cutting or even the feeding of union nuts integrated in the process is possible with the machines in one clamping. The axis drives offer accuracy to the "tenth". In the smaller machine sizes, the press movement is driven by a recirculating ball screw and electric drive, so that in some cases integrated hydraulics can be dispensed with altogether. The intuitive Marco Polo control concept enables simple and fast programming of these machines.
Besides the CNC machines, we also offer PEDRAZZOLI hammering machines for the conification of pipes.
Over the years, these machines have evolved from simple pipe end presses that run "on block" to axis-controlled processing machines. These machines of the eFX series then also offer more possibilities than just chipless forming of the tube ends. Forming, roller burnishing, cutting of excess lengths, milling, drilling, thread cutting or even the feeding of union nuts integrated in the process is possible with the machines in one clamping. The axis drives offer accuracy to the "tenth". In the smaller machine sizes, the press movement is driven by a recirculating ball screw and electric drive, so that in some cases integrated hydraulics can be dispensed with altogether. The intuitive Marco Polo control concept enables simple and fast programming of these machines.
Besides the CNC machines, we also offer PEDRAZZOLI hammering machines for the conification of pipes.
About us
Company portrait
The BEND and more GmbH ® is active with the sales and service of machine tools in the field of tube processing and here especially tube bending, tube forming and tube cutting. Here the sales and service of machines of the Italian machine building companies SPORTELLI.tech, STARGROUP, SMI , AFLB (Tauring) and PEDRAZZOLI, for which we are active in Germany as exclusive agency and/or selling partner, is in our center. We offer for our complete product range consulting, sales and the technical service from one source.
Together with our manufacturers and suppliers, we develop product-oriented solutions from the drawing to the finished component: machines, tools, optimized work steps from the stand-alone solution to the production island.
Above all, the constructively diverse application possibilities of tubes and hollow sections is our world. Our customers manufacture parts for heating and air-conditioning technology, the furniture industry, automotive and commercial vehicle technology, mechanical engineering and metal construction. Steel and stainless steel as tube material to be processed are just as familiar to us as copper and aluminum but also special materials such as KUNIFE or also plastics.
Our delivery program offers machines with different degrees of automation for the
Tube bending over mandrel
Ring and profile bending machines
Tube end forming or machining
Sawing of tubes
chipless cutting of tubes
Bending of tubes from coil
Tube expander for HVAC
and related peripheral solutions.
Together with our manufacturers and suppliers, we develop product-oriented solutions from the drawing to the finished component: machines, tools, optimized work steps from the stand-alone solution to the production island.
Above all, the constructively diverse application possibilities of tubes and hollow sections is our world. Our customers manufacture parts for heating and air-conditioning technology, the furniture industry, automotive and commercial vehicle technology, mechanical engineering and metal construction. Steel and stainless steel as tube material to be processed are just as familiar to us as copper and aluminum but also special materials such as KUNIFE or also plastics.
Our delivery program offers machines with different degrees of automation for the
Tube bending over mandrel
Ring and profile bending machines
Tube end forming or machining
Sawing of tubes
chipless cutting of tubes
Bending of tubes from coil
Tube expander for HVAC
and related peripheral solutions.