Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
TECVIL SARL
7, rue Jean Louis Guiot,
67220
Neuve Eglise
France
France
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Location
Hall map
Fairground map
Our range of products
Product categories
- 02 Machinery for the processing of rods, wires and strips
- 02.09 Machinery for the manufacture of wire mesh, wire cloth and wire netting
- 02.09.01 Wire mesh welding machines
Wire mesh welding machines
Our products
Product category: Wire mesh welding machines
SCHLATTER PG16, complete welding line to produce welded mesh
SCHLATTER PG16, complete welding line to produce welded mesh. Year: 2002
6 Meter line wire table
Line wire pre loading unit
Welding machine SCHLATTER MG 16.04/4C ( 4 welding transformer 100KVA each)
Cross wire feeder QFE34/2
Control cabinet MP PCS950/115U
Power cabinet
Stacking unit up to 6 meters
Optional conveyers’
TECHNICAL SPECIFICATION :
–
Mesh width
max. 1650 mm
min. 300 mm
Line wire length
800 – 6000 mm
Space between line wires
min 50 mm
Space between cross wires
min. 25mm
Line wire diameter
4.0 – 12.0 mm
Cross wire diameter
4.0 – 12.0 mm
Amout line wires
10
Line wire overhang
min. 0 mm
max. 170 mm
–
Max. line and cross wire diameter
Min space between line and cross wires
3.0 + 3.0 mm
50 x 50 mm
8.0 + 8.0 mm
100 x 100 mm
12.0 + 12.0 mm
150 x 150 mm
6 Meter line wire table
Line wire pre loading unit
Welding machine SCHLATTER MG 16.04/4C ( 4 welding transformer 100KVA each)
Cross wire feeder QFE34/2
Control cabinet MP PCS950/115U
Power cabinet
Stacking unit up to 6 meters
Optional conveyers’
TECHNICAL SPECIFICATION :
–
Mesh width
max. 1650 mm
min. 300 mm
Line wire length
800 – 6000 mm
Space between line wires
min 50 mm
Space between cross wires
min. 25mm
Line wire diameter
4.0 – 12.0 mm
Cross wire diameter
4.0 – 12.0 mm
Amout line wires
10
Line wire overhang
min. 0 mm
max. 170 mm
–
Max. line and cross wire diameter
Min space between line and cross wires
3.0 + 3.0 mm
50 x 50 mm
8.0 + 8.0 mm
100 x 100 mm
12.0 + 12.0 mm
150 x 150 mm
Product category: Wire mesh welding machines
SCHLATTER MG900, welding line
SCHLATTER MG900, welding line. year: 2004
With the following equipments:
6 Meter line wire table
Line wire pre loading unit
Welding machine SCHLATTER MG 16.0/6C ( 6 welding transformer 100KVA each)
Cross wire feeder QFE34/2
Cross wire advance system MVL1.2
Control cabinet MP PLS950/S7-300
Power cabinet
Stacking unit up to 6 meters MS11
Optional conveyers’
TECHNICAL SPECIFICATION :
Mesh width
max. 1650 mm
min. 300 mm
Line wire length
800 – 6000 mm
Space between line wires
min 50 mm
Space between cross wires
min. 25mm
Line wire diameter
4.0 – 12.0 mm
Cross wire diameter
4.0 – 12.0 mm
Amout line wires
16
Line wire overhang
min. 0 mm
max. 170 mm
Max. line and cross wire diameter
Min space between line and cross wires
3.0 + 3.0 mm
50 x 50 mm
8.0 + 8.0 mm
100 x 100 mm
12.0 + 12.0 mm
150 x 150 mm
With the following equipments:
6 Meter line wire table
Line wire pre loading unit
Welding machine SCHLATTER MG 16.0/6C ( 6 welding transformer 100KVA each)
Cross wire feeder QFE34/2
Cross wire advance system MVL1.2
Control cabinet MP PLS950/S7-300
Power cabinet
Stacking unit up to 6 meters MS11
Optional conveyers’
TECHNICAL SPECIFICATION :
Mesh width
max. 1650 mm
min. 300 mm
Line wire length
800 – 6000 mm
Space between line wires
min 50 mm
Space between cross wires
min. 25mm
Line wire diameter
4.0 – 12.0 mm
Cross wire diameter
4.0 – 12.0 mm
Amout line wires
16
Line wire overhang
min. 0 mm
max. 170 mm
Max. line and cross wire diameter
Min space between line and cross wires
3.0 + 3.0 mm
50 x 50 mm
8.0 + 8.0 mm
100 x 100 mm
12.0 + 12.0 mm
150 x 150 mm
Product category: Wire mesh welding machines
Welded mesh bending machine OSCAM P.12/96 +E
Welded mesh bending machine, equipped with 3 hydraulic cylinders, movable bench and electronically controlling unit EA33 , 6 meter long with 40 bending fingers.
On this machine the position of the bench can be set closer or farther to the bending fingers. This allows making short or long bending radius.
The electrical and hydraulic units are mounted next to the bender.
This machine can bend up to 50 wires on a 6meter length .On the EA PLC they can be stored up to 60 bending cycles, each cycles have up to 10 different bending radius witch will be executed automatically .
Length of the bench
6 meters
Bending capacity
50 wires max 8mm wire
30 wires max 10mm wire
20 wires max 12mm wire
Motor power
5.5 hp – 220 / 380 volts
Hydraulic system
High pressure pump – 4 pistons
PLC to store up to 60 cycles with up to 10 radiuses in each cycle.
Foot pedal to start the cycle.
Hydraulic unit and electrical panel can be mounted on the right or left side from the bender.
Social Network
Youtube
Twitter
Linkedin
Facebook
Pages
Newsletter
Legal mentions
General conditions of sale
Privacy policy
Contact us
Categories
On this machine the position of the bench can be set closer or farther to the bending fingers. This allows making short or long bending radius.
The electrical and hydraulic units are mounted next to the bender.
This machine can bend up to 50 wires on a 6meter length .On the EA PLC they can be stored up to 60 bending cycles, each cycles have up to 10 different bending radius witch will be executed automatically .
Length of the bench
6 meters
Bending capacity
50 wires max 8mm wire
30 wires max 10mm wire
20 wires max 12mm wire
Motor power
5.5 hp – 220 / 380 volts
Hydraulic system
High pressure pump – 4 pistons
PLC to store up to 60 cycles with up to 10 radiuses in each cycle.
Foot pedal to start the cycle.
Hydraulic unit and electrical panel can be mounted on the right or left side from the bender.
Social Network
Youtube
Pages
Newsletter
Legal mentions
General conditions of sale
Privacy policy
Contact us
Categories
About us
Company portrait
Welding Line