Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
REA Elektronik GmbH
Teichwiesenstr. 1,
64367
Mühltal
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Location
Media files
Hall map
Fairground map
Contact
Reto Heil
Marketingleiter
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 02 Processing machinery for metallic tubes and pipes
- 02.03 Tube machining centers
- 02.03.01 Laser processing centers for tubes
Laser processing centers for tubes
- 02 Processing machinery for metallic tubes and pipes
- 02.05 Machinery for the surface treatment of tubes
- 02.05.10 Coating lines for tubes
Coating lines for tubes
- 02 Processing machinery for metallic tubes and pipes
- 02.05 Machinery for the surface treatment of tubes
- 02.05.12 Lines for surface preparation for the adhesion of printing inks, varnishes and glues
Lines for surface preparation for the adhesion of printing inks, varnishes and glues
- 02 Processing machinery for metallic tubes and pipes
- 02.07 Marking and labelling systems for the tube and pipe industry
Marking and labelling systems for the tube and pipe industry
- REA JET - TITAN Controller
- REA JET DOD 2.0 Large Character Inkjet Printer
- REA JET high resolution inkjet printers - HP
- REA JET HR pro OEM high resolution inkjet printer - HP
- Small character inkjet printer based on continuous inkjet technology
- Laser systems for laser marking
- REA JET Laser Marking Station System Solution for the Extrusion Industry
- Signing technique dots, lines, large lettering
- REA LABEL PLU pallet labeller - Labelling of pallets
- REA LABEL ES: Labelling systems for fully automatic applications
- REA LABEL DS: Print, dispense and apply labels Print-dispense systems for a wide range of applications
- REA LABEL High speed servo mailing labeler
- 03 Tools, auxiliary materials and agents for the manufacturing and processing of metallic tubes and pipes
- 03.02 Agents
- 03.02.02 Cleaning agents
Cleaning agents
- 04 Tubes, pipes, tube products and tube accessories
- 04.12 Profiles
- 04.12.02 Stainless steel profiles
Stainless steel profiles
- 05 Testing technology, sensor technology and quality assurance for the tube and pipe industry
- 05.03 Product testing
- 05.03.10 Ovality testing equipment
Ovality testing equipment
- 09 Special area pipeline and OCTG technology (OCTG – Oil Country Tubular Goods)
- 09.01 Construction of OCTG plants and pipelines
- 09.01.01 Machinery and equipment
Machinery and equipment
- REA JET - TITAN Controller
- REA JET DOD 2.0 Large Character Inkjet Printer
- REA JET high resolution inkjet printers - HP
- REA JET HR pro OEM high resolution inkjet printer - HP
- Small character inkjet printer based on continuous inkjet technology
- Laser systems for laser marking
- REA JET Laser Marking Station System Solution for the Extrusion Industry
- Signing technique dots, lines, large lettering
- REA LABEL PLU pallet labeller - Labelling of pallets
- REA LABEL ES: Labelling systems for fully automatic applications
- REA LABEL DS: Print, dispense and apply labels Print-dispense systems for a wide range of applications
- REA LABEL High speed servo mailing labeler
- REA VERIFIER Code Quality Inspection Systems
- 09 Special area pipeline and OCTG technology (OCTG – Oil Country Tubular Goods)
- 09.04 Corrosion protection for pipelines
- 09.04.01 Coating technology
Coating technology
- 11 Services for the tube and pipe industry
- 11.03 Industry 4.0: Consulting and solutions
Industry 4.0: Consulting and solutions
Our products
Product category: Marking and labelling systems for the tube and pipe industry, Machinery and equipment
REA JET - TITAN Controller
The REA JET TITAN platform is a true cross-device and cross-technology operating concept for all REA JET marking technologies. Regardless of the industry or marking requirement, the REA JET TITAN platform offers solutions along the entire production chain. From the most modern interface architecture, freedom of design for all languages, fonts and characters to complete integration in machines and systems as an OEM solution for machine builders and integrators. Everything that is modern, investment- and future-proof is already on board
Product facts
Product facts
- Uniform operating logic
- State-of-the-art interface architecture
- For all REA JET marking technologies
- Suitable for all industries and marking requirements
- Can be fully integrated into machines and systems
- Marking along the entire production chain with one operating concept
Product category: Marking and labelling systems for the tube and pipe industry, Coating lines for tubes, Machinery and equipment, Coating technology
REA JET DOD 2.0 Large Character Inkjet Printer
The modular designed Large Character DOD coding and marking systems for texts, dates or logos are available in printing heights up to 140 mm for each print head. For larger printings several print heads can be combined. The resolution meets the requirements of virtually all industrial applications for marking and coding. These large character systems, with 7-, 16- or 32-nozzles print heads are easy to use, robust and due to the modular construction of the system components, highly flexible.
Print head brain work which pays off for our customers
For improving our most legendary sturdy REA JET DOD large character print heads further on, we have been driven by two decisive customer needs:
Print head brain work which pays off for our customers
For improving our most legendary sturdy REA JET DOD large character print heads further on, we have been driven by two decisive customer needs:
- Duplication of speed potential to up to 600 m/min
- Multiplication of their durability by lowering wear tear significantly reduced.
Product category: Marking and labelling systems for the tube and pipe industry, Coating lines for tubes, Lines for surface preparation for the adhesion of printing inks, varnishes and glues, Machinery and equipment
REA JET high resolution inkjet printers - HP
REA JET HR marking systems mark smooth surfaces cleanly, environmentally friendly and solvent-free through the use of newly developed inks. The systems of the HR series are maintenance-free and receive a new printing unit with every cartridge change. The REA JET HR is designed for production line and end-user installations.
Product facts
Product facts
- Stainless steel control unit in IP65 design
- Full colour graphic display, diagonal of 14,4 cm (5,7 inch)
- Graphical user interface in many languages
- Support of True Type Fonts (TTF) and Unicode character set
- Operation: ten-key keyboard, cursor block, push and turn operation
- REA JET HR 2K (with 2 print heads, up to 25.4 mm print height)
- REA JET HR 4K (with 4 print heads, up to 50.8 mm print height)
- Bulk system with 400 ml ink cartridge for minimum machine and system downtime
Product category: Marking and labelling systems for the tube and pipe industry, Coating lines for tubes, Machinery and equipment
REA JET HR pro OEM high resolution inkjet printer - HP
The REA JET HR pro OEM was specially developed for fully integrated installation in machines and systems. With the smallest dimensions in its class, it fits in any control cabinet and in any machine. With the possibility of connecting up to four print heads and an extremely powerful processor, the HR pro OEM is ideally equipped for demanding marking tasks. The HR pro OEM is the first choice especially for fast-running serialization applications and complete machine integration.
Product facts
Product facts
- Most compact dimensions in its class for complete machine and control cabinet integration
- Extremely powerful
- Best suited for serialization applications
- Up to 4 write heads (50.8 mm write height)
Product category: Marking and labelling systems for the tube and pipe industry, Stainless steel profiles, Machinery and equipment
Small character inkjet printer based on continuous inkjet technology
With the REA JET SC, texts, data, barcodes and logos are printed contact-free in good resolution at high speed and with very short drying times. Particularly good marking results are achieved on smooth surfaces: Foils, laminates, various plastics and metals.
Product facts
Product facts
- Vertical resolution: 48 pixels, for up to eight lines of text
- Stainless steel housing, IP 54
- Graphical user interface in over 20 languages
- Support for True Type Fonts (TTF)
- Ready for Industry 4.0
- Small, compact and light weight, only approx. 20 kg
- State-of-the-art operating concept: REA JET TITAN platform
Product category: Marking and labelling systems for the tube and pipe industry, Laser processing centers for tubes, Machinery and equipment, Coating technology, Stainless steel profiles
Laser systems for laser marking
The fiber laser REA JET FL is a system for fiber laser marking. Fiber lasers belong to the so-called solid-state lasers. Laser light from a diode laser is guided and amplified over a very long distance through an optical glass fiber. This creates a very intense laser beam with very high beam quality. For fiber laser marking, a pulsed fiber laser with a pulse duration of 100 nanoseconds is usually used.
With its intense laser beam and innovative, particularly compact focusing lens, the REA JET FL fiber laser marks products with extremely small texts, codes and logos as well as with high-resolution markings. The fiber laser marking is permanently durable and ideal for harder metals such as stainless steel and titanium as well as for plastics but also for thin foils. The marking is even possible on oily, corroded or on surfaces hotter than 1000°C without any problems.
Product facts
With its intense laser beam and innovative, particularly compact focusing lens, the REA JET FL fiber laser marks products with extremely small texts, codes and logos as well as with high-resolution markings. The fiber laser marking is permanently durable and ideal for harder metals such as stainless steel and titanium as well as for plastics but also for thin foils. The marking is even possible on oily, corroded or on surfaces hotter than 1000°C without any problems.
Product facts
- Laser unit: FL 20, FL 30, FL 50
- Integrated pilot laser
- Laser power: 20W, 30W, 50W
Product category: Laser processing centers for tubes, Marking and labelling systems for the tube and pipe industry, Machinery and equipment, Industry 4.0: Consulting and solutions
REA JET Laser Marking Station System Solution for the Extrusion Industry
Marking with light: Laser systems
Modular and size-adaptable laser marking station enables clean, environmentally friendly and non-contact product marking of different extruded plastics directly in the extrusion line.
Advantages:
In addition to modern interfaces for fast data exchange, the user-friendly operation of REA laser systems is an important success factor. With the
REA JET TITAN platform, the uniform operating concept for all REA marking technologies, even non-laser experts operate the marking stations safely. This not only saves costs and time, but also reduces the risk of incorrect applications.
Modular and size-adaptable laser marking station enables clean, environmentally friendly and non-contact product marking of different extruded plastics directly in the extrusion line.
Advantages:
- Captive, high-quality marking of text, codes and graphics
- No consumables, virtually maintenance free operation
- Laser marking is smudge-proof and requires no drying time
- Autofocus and motorized Z-axis for quick setup during product changeovers
- Optional camera for process control
- Laser protection class 1
- Control via network-compatible operating platform REA JET TITAN
- Pilot laser for easy system setup
In addition to modern interfaces for fast data exchange, the user-friendly operation of REA laser systems is an important success factor. With the
REA JET TITAN platform, the uniform operating concept for all REA marking technologies, even non-laser experts operate the marking stations safely. This not only saves costs and time, but also reduces the risk of incorrect applications.
Product category: Lines for surface preparation for the adhesion of printing inks, varnishes and glues, Coating lines for tubes, Marking and labelling systems for the tube and pipe industry, Machinery and equipment, Coating technology
Signing technique dots, lines, large lettering
Perfect marking thanks to dot-accurate line guidance Identification, marking and pretreatment Color markings play a central role in many technical areas. In industrial processes, colors provide information about the quality and condition of products, control processes and determine behavior. Whether dot marking in red, indication of tested quality in green or coloured line marking for pipes, profiles or endless goods - REA Signier Technik offers even more: With marking heads as a marking block, large texts up to 700 mm high can be written. Point by point!
REA JET injection system: The injection systems (EDS) are particularly suitable for very small dot and line markings. The dot size is adjusted by selecting the nozzle size, different material pressure and the infinitely variable setting on the controller.
Product facts
Product facts
REA JET injection system: The injection systems (EDS) are particularly suitable for very small dot and line markings. The dot size is adjusted by selecting the nozzle size, different material pressure and the infinitely variable setting on the controller.
Product facts
- Type REA JET EDS: Dot marking also with pigmented inks
- Type REA JET EDS II: Dot marking, heavy-duty version (IP65)
- Available nozzle sizes for different drop sizes: 80, 130, 270, 350, 500 µm fine dot and line marking in thickness from 0.2 to 3 mm
Product facts
- Type REA JET ST SR-1: medium size - dot, line and area marking for almost all media
- Type REA JET ST SRM-1: medium design - dot, line and area marking, for abrasive media
- Type REA JET ST SR-5: small design - dot, line and area marking for almost all media
- Type REA JET ST SR-7: smallest design - dot and line marking for almost all media
- Available nozzle sizes for different drop sizes: 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 1.5 mm
- For dot, line and area marking in thicknesses from 3 to 60 mm
Product category: Marking and labelling systems for the tube and pipe industry, Machinery and equipment, Industry 4.0: Consulting and solutions
REA LABEL PLU pallet labeller - Labelling of pallets
The REA LABEL pallet labelling systems have been specially developed for integration into logistics and production lines. The modular design allows
fast and flexible configuration. This means that special customer requirements can also be implemented. By using high quality components, a flexible REA LABEL Micro Processor or Siemens S7 machine control, a flexible system has been created.
REA LABEL PLU Advantages:
fast and flexible configuration. This means that special customer requirements can also be implemented. By using high quality components, a flexible REA LABEL Micro Processor or Siemens S7 machine control, a flexible system has been created.
REA LABEL PLU Advantages:
- Increase the degree of automation and optimize performance
- Marking in continuous operation or at standstill
- Robust enclosures made of aluminium or stainless steel, stable mechanics with air conditioning and/or heating
- Deep-freeze applications down to -28° C
- Single-sided labelling in conveying direction on the long side
- Two-sided labelling on the long and short sides (CCG/GS1)
- Three-sided labelling on the front, long and rear sides
- Pneumatic or servomotor-driven height and side traversing (optional)
- Easy integration into existing logistics and production environments
- User-friendly software, state-of-the-art interfaces
- Flexible data connection to higher-level ERP systems
Product category: Marking and labelling systems for the tube and pipe industry, Machinery and equipment
REA LABEL ES: Labelling systems for fully automatic applications
REA LABEL ES label dispensers are specially designed for the application of pre-printed adhesive labels. Due to their compact design with integrated control system
the REA LABEL ES can be conveniently integrated into existingv production environments. The modular design of the systems using
high-quality materials and user-friendly handling ensure efficient and flexible use of the dispenser systems for a wide range of applications
fully automatic labelling applications.
REA LABEL ES Advantages:
the REA LABEL ES can be conveniently integrated into existingv production environments. The modular design of the systems using
high-quality materials and user-friendly handling ensure efficient and flexible use of the dispenser systems for a wide range of applications
fully automatic labelling applications.
REA LABEL ES Advantages:
- Compact, robust and modular design for easy integration into existing production environments
- Integration of REA standard or customized pneumatic and servo applicators
- Expandable with the high-resolution labelling system REA JET HR inkjet printer or with REA laser systems
- Precise and fast labelling thanks to state-of-the-art control technology
- Standard passage widths of 4", 6" and 8
- Speeds up to 60 m/min (optionally extendable)
- High system availability due to fast label changeover
Product category: Marking and labelling systems for the tube and pipe industry, Machinery and equipment
REA LABEL DS: Print, dispense and apply labels Print-dispense systems for a wide range of applications
REA LABEL DS print-dispense systems combine the functions of label printing, dispensing and subsequent application to the product
in one system. Our print dispensing systems can be equipped with common industrial print modules and can be flexibly integrated into machines and systems or used as a stand-alone solution. The solid construction makes maintenance and handling easy and ensures even more efficiency. Top performance
at printing and dispensing speed as well as high print quality characterize our REA LABEL print dispensing systems.
REA LABEL DLS continuous labeller:
in one system. Our print dispensing systems can be equipped with common industrial print modules and can be flexibly integrated into machines and systems or used as a stand-alone solution. The solid construction makes maintenance and handling easy and ensures even more efficiency. Top performance
at printing and dispensing speed as well as high print quality characterize our REA LABEL print dispensing systems.
REA LABEL DLS continuous labeller:
- Inline printing, dispensing and subsequent application of labels in a continuous flow without downtime
- Intelligent overall concept for maximum degree of automation and uninterrupted production flow
- Modular design for individual component selection
- Prepared to accept standard industrial print modules (e.g. Novexx, CAB, Sato and Zebra)
- Flexible integration into packaging machines or production lines due to compact design
- Direct and fully automatic printing and application in one operation
- Suitable for individual workflows
- Prepared to accept standard industrial print modules (e.g. Novexx, CAB, Sato and Zebra)
- Flexible REA LABEL Micro processor or Siemens S7 machine control system
- Integration of camera and scanner systems
- Flexible operation via standard input terminal, touch display or machine control (HMI)
- Use of REA standard or customized pneumatic or high speed servo applicators
- Various standard applicators for applying the label to products and packaging by rolling, blowing or pressing on
- Complete system control is possible via REAnet protocol
- Optionally with Profinet and Profibus connection
Product category: Marking and labelling systems for the tube and pipe industry, Machinery and equipment
REA LABEL High speed servo mailing labeler
The new REA LABEL servo labeller is characterised by top performance in printing and dispensing speeds of up to 2500 products per hour, as well as high print quality. It dispenses shipping labels quickly and precisely onto cardboard boxes or packages of different heights. Due to the servo electric dispensing applicator, the
the degree of automation in production is significantly increased. The also new REA LABEL pallet labelling system from our own development and production, labels your pallets on up to three sides at standstill. The system is operated via a 7 inch touch panel.
the degree of automation in production is significantly increased. The also new REA LABEL pallet labelling system from our own development and production, labels your pallets on up to three sides at standstill. The system is operated via a 7 inch touch panel.
Product category: Ovality testing equipment, Machinery and equipment, Industry 4.0: Consulting and solutions
REA VERIFIER Code Quality Inspection Systems
Code inspection systems from REA VERIFIER: Today, almost all products in modern life carry coded information. Manufacturer data, product identifications,
Prices, article numbers and much more are translated into machine-readable barcodes and 2D codes. These must be read at supermarket checkouts and
error-free, fast and reliable reading at many points in operational goods logistics. The assurance of high first read rates in automated
Processes makes compliance with high code quality and applicable standards mandatory. To check your code quality and to avoid
Cost and error risks, REA VERIFIER offers optical inspection equipment for the measurement of 1D and 2D codes.
Areas of application:
Advantages:
Prices, article numbers and much more are translated into machine-readable barcodes and 2D codes. These must be read at supermarket checkouts and
error-free, fast and reliable reading at many points in operational goods logistics. The assurance of high first read rates in automated
Processes makes compliance with high code quality and applicable standards mandatory. To check your code quality and to avoid
Cost and error risks, REA VERIFIER offers optical inspection equipment for the measurement of 1D and 2D codes.
Areas of application:
- Checking the code quality of 1D and 2D codes according to international standards and GS1 specifications
- Checking of codes for correctness of content
- Automated random sample inspection
- In outgoing and incoming goods inspection
- ISO/IEC 15415, ISO/IEC 15416, ISO/IEC 29158 (DPM)
Advantages:
- Avoidance of rejects through timely detection of mislabeling
- Ensuring high first read rates
- Measurement protocol with evaluation of code criteria (e.g. also for ISO certification)
- Legal security through compliance with quality standards (ISO/IEC, GS1 etc.)
- Mobile and stationary devices, flexible use
- Measurement of codes of almost all sizes
- Numerous equipment variants and accessories for a wide range of applications
- Selectable illumination options (red light, white light, diffuse red light, UV light, IR light)
- AuditTrail with Active Directory connection
- REA VeriMax including software API with detailed documentation for integration into machine software
Product category: Cleaning agents
Inks, paints, primers and consumables
REA JET develops and distributes inks, paints, primers and cleaners for almost all coding, marking and signing applications worldwide. The chemical compatibility and the interaction with all components of the REA JET product families enjoys the highest priority during the release for the processing in REA JET marking systems and ensures the trouble-free operation of the REA JET industrial printers in the production.
The use of original REA JET inks, paints, primers and cleaners guarantees the reliable operation of our systems. With over 500 standard and special inks in our product range, we offer you a wide selection.
Modern development and testing methods constantly ensure the quality of our consumables.
The use of original REA JET inks, paints, primers and cleaners guarantees the reliable operation of our systems. With over 500 standard and special inks in our product range, we offer you a wide selection.
Modern development and testing methods constantly ensure the quality of our consumables.
About us
Company data
Number of employees
100-499
Foundation
1982
