Manage stand orders
Select Option

Taymer International Inc.

208 Telson Rd., L3R 1E6 Markham, ON
Canada
Telephone +1 905 4792614
Fax +1 905 4792636
info@taymer.com

Hall map

wire 2020 hall map (Hall 13): stand A89-03

Fairground map

wire 2020 fairground map: Hall 13

Contact

Bastien Cordier

Phone
9054792614

Email
bastien.cordier@taymer.com

Our range of products

Product categories

  • 02  Machinery for the processing of rods, wires and strips
  • 02.06  Machinery for the manufacture of cables
  • 02.06.03  Foil pay-off and taping systems

Foil pay-off and taping systems

  • 02  Machinery for the processing of rods, wires and strips
  • 02.06  Machinery for the manufacture of cables
  • 02.06.15  Machines for cable marking
  • 02  Machinery for the processing of rods, wires and strips
  • 02.06  Machinery for the manufacture of cables
  • 02.06.23  Peripheral systems for cable production
  • 02.06.23.03  Length measuring machines
  • 02  Machinery for the processing of rods, wires and strips
  • 02.07  Machinery for the manufacture of fibre optics
  • 02.07.07  Machines for the marking of fibre optics

Machines for the marking of fibre optics

  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.01  Materials testing
  • 05.01.02  Equipment for non-destructive materials testing
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.02  Optical test systems for wire
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.03  Diameter measuring devices
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.04  Profile testers
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.06  Ovality testers
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.07  Geometry testers
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.15  Analytical equipment
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.17  Optical testing systems for wire products
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.24  Laser measuring equipment
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.02  Product testing
  • 05.02.25  Test equipment for optical fiber cables
  • 05  Testing technology, sensor technology and quality assurance for the wire and cable industry
  • 05.05  Quality assurance systems (incl. factory data acquisition)

Our products

Product category: Optical test systems for wire, Length measuring machines, Equipment for non-destructive materials testing, Diameter measuring devices, Profile testers, Ovality testers, Geometry testers, Analytical equipment, Optical testing systems for wire products, Laser measuring equipment, Test equipment for optical fiber cables, Quality assurance systems (incl. factory data acquisition)

Surface and Diameter Inspection (SI3100)

The Surface Inspector (SI3100) is the only tool that can capture, analyze, and judge every square millimeter of your product-cable jacket, pipe, tube, bar stock or water soluble tape. It is the most thorough method of detecting surface flaws available.

With Taymer’s Surface Inspector, you can be sure the product going to your customers meets your high standards and is without surface defects.

More Less

Product category: Machines for cable marking, Machines for the marking of fibre optics, Optical test systems for wire, Analytical equipment, Optical testing systems for wire products, Test equipment for optical fiber cables, Quality assurance systems (incl. factory data acquisition)

Inline Print Verification (PV1400)

The Print View 1400 is the only tool available for operators to completely verify and guarantee print quality on high speed production lines. This will help you reduce costs in your production facilities through reduced rework and improved productivity.

The Print View 1400 uses high-speed, digital imaging to capture real time images of cable markings. The digital images are enhanced, magnified and displayed on a monitor, enabling the operator to properly set up and monitor cable printers before poor print causes expensive waste.

The operator’s console can be located up to 200 feet or 60 meters from the Image Capture Station, allowing one operator to supervise two or three lines simultaneously.

More Less

Product category: Equipment for non-destructive materials testing, Optical test systems for wire, Diameter measuring devices, Profile testers, Ovality testers, Geometry testers, Analytical equipment, Optical testing systems for wire products, Laser measuring equipment, Test equipment for optical fiber cables, Quality assurance systems (incl. factory data acquisition)

Surface & Geometry Defect Detector

The SI4100-LP will capture, analyze and judge every square millimeter of your product. It is the most thorough method of detecting surface flaws available. The SI4100-LP system provides pictures of your profile as well as laser-accurate dimensional measurements of selected features. Simplify the QA process and allow your operator to see defects during your run. With the Surface Inspector you can be sure the product you are sending to your customers is without defects and according to your company standards.

More Less

Product category: Machines for cable marking, Foil pay-off and taping systems, Machines for the marking of fibre optics

Hot Foil Printer (HF2000)

The Taymer HF2000 Hot Foil Printer is designed for printing in either meters or feet. This dual function is accomplished by changing print drums. The drums are secured by three fasteners so that the complete operation takes only a couple of minutes.

A built in microprocessor controls all aspects of the marking process and adjusts the machine to suit the changing conditions and speeds of the production line. Clear durable legends are produced at speeds up to 450 ft/min (150m/min).

The ease of operation and setup reduces scrap, production delays and the risk of damage to delicate communication and fibre optic cables. A dual tape spool and tape accumulator system eliminates print interruptions.

These standard features and more make the Taymer HF2000 Hot Foil printer a new generation in wire and cable printing.

More Less

Product category: Diameter measuring devices, Equipment for non-destructive materials testing, Optical test systems for wire, Geometry testers, Analytical equipment, Optical testing systems for wire products, Test equipment for optical fiber cables, Quality assurance systems (incl. factory data acquisition)

Lump Neckdown Diameter Defect Detector (LN2400)

The Lump and Neck-Down Inspector is the only tool that can provide images of your lumps and neck-downs on: cable jacket, pipe or tube. This is critical in assessing whether a measured diameter variation is in fact a defect and whether action must be taken. Your technical staff won’t have to rewind miles of product to try to locate a defect. They can use Taymer’s image viewing software to analyze and diagnose any detected defects.

More Less

Product category: Length measuring machines

Length Measurement (LR600)

The Length Rite 600 will help you reduce costs in your production facilities by providing you with the most accurate cable length measurement in the industry.

The advanced control system for the Length Rite 600 allows operators to digitally input to other length measuring devices (such as a marker) to ensure uniformity of results. Operators have up to two length measurement presets as well as a customizable output.

When used with a marker, cable length measurement information can be printed on the product, ensuring the highest accuracy on print for your customers.

More Less

About us

Company details

With more than 50 years’ experience producing machines, Taymer International has developed leading edge equipment including optical quality inspection systems, highly accurate length measurement machines, and various cable printers designed to meet specific needs.

As a world leading manufacturer of equipment for the wire, cable, pipe and tube industry, we’ve built an extensive range of solutions designed to provide value and reduce cost to customers on the production line. Now expanding to new industries, new application solutions are constantly being developed for the growing demand of Taymer technologies around the world.

More Less

Company data

Foundation

1961

Area of business
  • Wire industry
  • Cable industry
  • Automotive supply industry
  • Iron, steel and non-ferrous metal industry
  • Electrical industry
  • Construction industry
  • Measuring and control technology
  • Services