ROLF SCHLICHT GmbH

Grootkoppel 16, 23858 Reinfeld
Germany
Telephone +49 4533 6063-100
Fax +49 4533 6063-101
info@schlicht-gmbh.de

Hall map

wire 2018 hall map (Hall 12): stand A48

Fairground map

wire 2018 fairground map: Hall 12

Contact

Heiko Heynen

Managing Director

Phone
+49 40 679942-0

Email
info@schlicht-gmbh.de

Lars Bochmann

Managing Director

Phone
+49 40 679942-0

Email
info@schlicht-gmbh.de

Our range of products

Product categories

  • 01  Wire manufacturing and finishing machinery
  • 01.04  Surface and heat treatment
  • 01.04.12  Lubricant application
  • 01  Wire manufacturing and finishing machinery
  • 01.05  Wire cleaning, machining, forming and coating
  • 01.05.02  Coating
  • 01  Wire manufacturing and finishing machinery
  • 01.09  Cable and stranding machines
  • 01.09.08  Insulation strippers for cables

Insulation strippers for cables

  • 01  Wire manufacturing and finishing machinery
  • 01.09  Cable and stranding machines
  • 01.09.09  Powder applicators
  • 01  Wire manufacturing and finishing machinery
  • 01.12  Special machinery and equipment
  • 01.12.07  Airwipes

Our products

Product category: Powder applicators

RS POWDERTECH powder coating machine - model RSC

The RS POWDERTECH powder coating machine, model RSC,  was designed for an even, finely dosable and absolutely dust-free powdering of cables, wires, hoses, profiles with powders like talc, stearate, lac powder, swellable powder etc. The machine is able to powder diameters up to 200 mm as well as tapes up to 500 mm width.

Due to the electrostatic charging of the powder a strong adhesive power on the product and a very even layer on the surface is reached. The electrostatic also makes sure that no powder falls from the product outside of the dusting chamber. Transport of the powder takes place by means of dried compressed air. We can offer machine with electrostatic but also supply with only 2 or 4 powder nozzles is possible, depending on application.

For powdering hoses, profiles and tapes made of rubber mostly a machine without electrostatic is used, but with 2-4 pneumatic powder nozzles.

In the machine there is a fluidized powder hopper out of which the powder is sucked by pneumatic Venturi pumps and blown into the guns.

For an optimal adjustment of the powder quantity you can adjust the power of the electrostatic charging from 0-100 kV, the powder quantity and the speed of the dust cloud. Depending on the product the powder gun can be equipped with different powder nozzles.

In the machine there is a fully automatic and maintenance free filter system which is no longer cleaned off by blowing in compressed air. Thanks to this filter system a strong and constant vacuum is generated in the machine, which guarantees that no powder will escape into the ambient. Inlet and outlet openings of the dusting chamber do not have to be sealed by brushes etc.

If there is not enough space in the line to place the machine we are able to deliver a free standing dusting chamber which is connected to the machine by hoses of max. 3 m length. For an extremely fine powdering of slowly running products we provide as an option a fine dosing device to make sure that only a breath of powder is transported to the guns.

We deliver a wide range of options adapted to your specification.
As accessories we deliver for example a 90 l powder hopper, a powder flow indicator, giving an alarm if there does not enter any powder into the powder guns, an automatic control of the electrostatic and pneumatic according to extrusion speed as well as interface to connect the machine with the line.

The machine will be presented in function with powder.

More Less

Product category: Airwipes

HUESTIS Air misers

The HUESTIS air misers are used since many years in the cable, wire and profile industry with best success. The air wipes are of low noise, dry highly efficient and are paid within short since the compressed air consumption is very low because of a special construction. We supply the HUESTIS air wipes with sizes from 1,6 mm up to 178 mm diameter. Special sizes also in rectangular shape are available upon request. They open automatically to allow knots, splices and other oversizes to pass without stopping production or creation of damages. Due to their small size they can be mounted in any cooling line without problems.

More Less

Product category: Insulation strippers for cables

HUESTIS Cable strippers

The cable strippers are equipped for stripping respectively skinng of cables and wires with core respectively conductor diameters of 0,8 up to 100 mm. In many cases just the recovery of a drum is paying for the machine.

Functionality:

A hardened steel stripper foot sized closely to the core diameter separates the jacket from the core. The steel saw blade rides in a closed groove in the foot. Only the protective foot has contact with the core and makes a damage of it impossible.

Furthermore a combined puller-chopper (JPC) for the cut jacket is available. This cuts the jacket to pieces of abt. 200 to 300 mm length.

More Less

Product category: Lubricant application

RS POWDERTECH powder coating machine - model RSC

The RS POWDERTECH powder coating machine, model RSC,  was designed for an even, finely dosable and absolutely dust-free powdering of cables, wires, hoses, profiles with powders like talc, stearate, lac powder, swellable powder etc. The machine is able to powder diameters up to 200 mm as well as tapes up to 500 mm width.

Due to the electrostatic charging of the powder a strong adhesive power on the product and a very even layer on the surface is reached. The electrostatic also makes sure that no powder falls from the product outside of the dusting chamber. Transport of the powder takes place by means of dried compressed air. We can offer machine with electrostatic but also supply with only 2 or 4 powder nozzles is possible, depending on application.

For powdering hoses, profiles and tapes made of rubber mostly a machine without electrostatic is used, but with 2-4 pneumatic powder nozzles.

In the machine there is a fluidized powder hopper out of which the powder is sucked by pneumatic Venturi pumps and blown into the guns.
For an optimal adjustment of the powder quantity you can adjust the power of the electrostatic charging from 0-100 kV, the powder quantity and the speed of the dust cloud. Depending on the product the powder gun can be equipped with different powder nozzles.

In the machine there is a fully automatic and maintenance free filter system which is no longer cleaned off by blowing in compressed air. Thanks to this filter system a strong and constant vacuum is generated in the machine, which guarantees that no powder will escape into the ambient. Inlet and outlet openings of the dusting chamber do not have to be sealed by brushes etc.

If there is not enough space in the line to place the machine we are able to deliver a free standing dusting chamber which is connected to the machine by hoses of max. 3 m length. For an extremely fine powdering of slowly running products we provide as an option a fine dosing device to make sure that only a breath of powder is transported to the guns.

We deliver a wide range of options adapted to your specification.
As accessories we deliver for example a 90 l powder hopper, a powder flow indicator, giving an alarm if there does not enter any powder into the powder guns, an automatic control of the electrostatic and pneumatic according to extrusion speed as well as interface to connect the machine with the line.

The machine will be presented in function with powder.

More Less

Product category: Coating

RS POWDERTECH powder coating machine - model RSC

The RS POWDERTECH powder coating machine, model RSC,  was designed for an even, finely dosable and absolutely dust-free powdering of cables, wires, hoses, profiles with powders like talc, stearate, lac powder, swellable powder etc. The machine is able to powder diameters up to 200 mm as well as tapes up to 500 mm width.

Due to the electrostatic charging of the powder a strong adhesive power on the product and a very even layer on the surface is reached. The electrostatic also makes sure that no powder falls from the product outside of the dusting chamber. Transport of the powder takes place by means of dried compressed air. We can offer machine with electrostatic but also supply with only 2 or 4 powder nozzles is possible, depending on application.

For powdering hoses, profiles and tapes made of rubber mostly a machine without electrostatic is used, but with 2-4 pneumatic powder nozzles.

In the machine there is a fluidized powder hopper out of which the powder is sucked by pneumatic Venturi pumps and blown into the guns.
For an optimal adjustment of the powder quantity you can adjust the power of the electrostatic charging from 0-100 kV, the powder quantity and the speed of the dust cloud. Depending on the product the powder gun can be equipped with different powder nozzles.

In the machine there is a fully automatic and maintenance free filter system which is no longer cleaned off by blowing in compressed air. Thanks to this filter system a strong and constant vacuum is generated in the machine, which guarantees that no powder will escape into the ambient. Inlet and outlet openings of the dusting chamber do not have to be sealed by brushes etc.

If there is not enough space in the line to place the machine we are able to deliver a free standing dusting chamber which is connected to the machine by hoses of max. 3 m length. For an extremely fine powdering of slowly running products we provide as an option a fine dosing device to make sure that only a breath of powder is transported to the guns.

We deliver a wide range of options adapted to your specification.
As accessories we deliver for example a 90 l powder hopper, a powder flow indicator, giving an alarm if there does not enter any powder into the powder guns, an automatic control of the electrostatic and pneumatic according to extrusion speed as well as interface to connect the machine with the line.

The machine will be presented in function with powder.

More Less

Company news

Date

Topic

Download

Mar 15, 2018

ROLF SCHLICHT GmbH - new company management

ROLF SCHLICHT GmbH is distributor of technology for plastic, rubber and cable industry, offering worldwide machines, service and support by phone/e-mail. The company is internationally known for their own product lines RS POWDERTECH type RSC powder coating machines for the cable and rubber industry and RS MULTICUT cutting machines.

ROLF SCHLICHT GmbH is acting successfully in the market for almost 60 years and is the original manufacturer for many special powder coating solutions, like graphite polishing stations for instance. RS POWDERTECH powder coating machines, type RSC, are designed for powdering with talc. Since more than 10 years there is also very good experience in powder coating with graphite or stearates. Consequently
RS POWDERTECH powder coating machines type RSC provide complete solutions for the powder coating process. 

Since the end of 2016 the company has a new management. After the sale of the company to Bochmann Holding GmbH the managing partners, Mr. Lars Bochmann and Mr. Heiko Heynen, took over the management.

The company, established in 1959, was managed since 1979 by the two sons of the founder and end of 2016 handed over to the third generation. After one year advisory support Michael Schlicht retired. Joachim Schlicht, with his longstanding experience in powder coating, is still giving support, if required. Using the advice of the original managing partners the takeover has been completed in 2017.

In November 2017 ROLF SCHLICHT GmbH moved to new business premises in Reinfeld together with USD Gebrauchtmaschinen für Gummi und Kunststoff GmbH and M+R Multitronik GmbH, both of them are part of the Bochmann Holding GmbH. The new location combines all companies in one domicile and offers further growth potential for the future.

This relocation will provide a clear signal for the expansion of the business. ROLF SCHLICHT GmbH will continue to offer a wide product range of high quality and will further push the innovations together with its partners.

Following the quote of the Greek philosopher Heraklit “The only constant in the universe is change”, program, service and delivery reliability are supposed to be improved and expanded continuously.

Pay a visit to ROLF SCHLICHT GmbH at the WIRE 2018 in Düsseldorf April 16 - 20 in hall 12 – stand A48. Convince yourself of our services and get to know us personally.

Heiko Heynen                                  Lars Bochmann
Managing Director                         Managing Director

More Less

Nov 27, 2017

HUESTIS Air misers and cable strippers

The HUESTIS air misers are used since many years in the cable, wire and profile industry with best success. The air wipes are of low noise, dry highly efficient and are paid within short since the compressed air consumption is very low because of a special construction. We supply the HUESTIS air wipes with sizes from 1,6 mm up to 178 mm diameter. Special sizes also in rectangular shape are available upon request. They open automatically to allow knots, splices and other oversizes to pass without stopping production or creation of damages. Due to their small size they can be mounted in any cooling line without problems.

The HUESTIS cable stripper is made for stripping respectively skinning of cables and wires with core respectively conductor diameters of 0,8 up to 100 mm. In many cases just the recovery of a drum is paying for the machine.

More Less

Nov 27, 2017

RSC Powder coating machine

During the Wire show in Düsseldorf ROLF SCHLICHT GmbH, Reinfeld/Hamburg will present different versions of its electrostatic powder coating machines. The machine model RSC was designed to powder cables, wires, hoses, and profiles evenly, finely dosed and absolutely dust-free with powders like talc, stearate, varnish powder, swellable powder, graphite etc.

In the machine there is installed a fully automatic and maintenance free filter system which is not cleaned-off by blowing in compressed air. Thanks to this filter system a strong and constant vacuum is generated in the machine, so that it can be guartanteed no powder will escape into the ambient.

The machine will be manufactured according to the required extrusion speed and product diameter. To fit the machine perfectly into your line several options are available to design the machine. We offer many special solutions, also for powdering single strands before stranding.

In order to convince you of the dust-free working performance we will show the machine in function with powder.

More Less

Nov 27, 2017

We moved to new business premises

On November 15, 2017 we moved from Hamburg to Reinfeld. Our new office is at

Grootkoppel 16
23858 Reinfeld
phone +49 4533 6063-100
fax +49 4533 6063-101
info@schlicht-gmbh.de
www.schlicht-gmbh.de

Our mail addresses remained unchanged, but please notice our new phone and fax numbers.

More Less

About us

Company details

in 1959 ROLF SCHLICHT GmbH was founded by graduate chemist Rolf Schlicht. Due to personal contacts in the rubber and cable industry, the trading house for technical industrial products specializes in representing internationally well-known manufacturers of machines for these industries.

The company’s specialists offer technical support of  different manufacturers and consulting at the customers.

After more than 50 years of company history ROLF SCHLICHT employs ten staff members. Beside the technology and sale of machines and plants for the rubber and cable industry we are also engaged in the plastics industry.

We represent various international well-known machine manufacturers from Italy, Norway and the United States, i. e. HUESTIS INDUSTRIAL, the BATTAGGION group with MOLTENI and VALTORTA, COMERIO ERCOLE, FRIUL FILIERE, PRODICON, PUMATECH and SAGITTA.

Already since January 2005 we are representing Messrs. NorMec/Norway, manufacturer of machines and systems for processing/splicing of all kinds of rubber and silicone profiles.

USD Gebrauchtmaschinen für Gummi und Kunststoff GmbH - 35 years of experience.
In 1982 this subsidiary was established, mainly engaged in procuring and selling used and reconditioned machines and whole lines for the rubber industry, but also offers a selection of new machines.

Our own machine production
Already 35 years ago ROLF SCHLICHT GmbH started with the development of powder coating machines type RSC for continuously running cords, mainly in the range of cable and rubber.
Together with a specialized machine factory close to Hamburg we meanwhile develop and produce already the fourth generation of our powder coating machines. Due to an absolutely dust-free operation and a finely adjustable powdering intensity, these machines are supplied worldwide.
We deliver systems for manifold sectors: from high-speed cable lines to extrusion lines for rubber profiles, hoses or bands, production of molded goods and more. We also develop special systems exactly customized to the requirements of individual clients.

Furthermore  we produce with our partner close  to Hamburg since many years high precisely operating cutting machines and haul-off systems, type RS MULTICUT for the range of plastic and rubber extrusion. Our systems are in compliance with the current standard of technology. They guarantee clean cutting surfaces, are flexible usable and of low-maintenance technique. Also these machines are very popular worldwide.
Technical advice, delivery of spare parts ex our works in Reinfeld, prompt service, customer visits on site and trials are of course belonging to our tasks.
For machines of our own production we employ worldwide representatives. Furthermore we are also looking for new machines and plants for our customers.

More Less

Company data

Foundation

1959

Area of business
  • Wire industry
  • Cable industry
  • Trade, technical specialist retail trade
  • Services