Customised HITRONIC fibre optic cable assemblies
The ÖLFLEX CONNECT portfolio comprises not only copper-based conductors. At SPS, Lapp is supplementing the range with HITRONIC fibre optic cables for industrial and office use. Users can define fibre optic cable assemblies tailored to their requirements based on the comprehensive range of LAPP HITRONIC cut to length range. This way, they save themselves the splicing, connection and installation work normally associated with glass fibre connections. The assembled length can be installed on site and then plugged directly into the system and used (plug & play).
ÖLFLEX CHAIN 90 P/CP high-end industrial cable
The new ÖLFLEX CHAIN 90 P/CP is part of Lapp's extended line performance class and is aimed at users who have the highest demands for use in constantly moving drag chains. The cable with extended maintenance intervals has a highly abrasion-resistant and notch-resistant PUR outer sheath and special TPE conductor insulation that is flexible even at very low temperatures. This makes it suitable for both indoor and outdoor use - for example in industrial drives but also in wind turbines or electric vehicles, where limited space often calls for very tight bending radii. It is extremely resistant to mineral oil based lubricants, UV and weather-resistant, halogen-free and highly flame retardant. On top of all that, the ÖLFLEX CHAIN 90 P/CP is UL/cUL-certified. This means it is approved for use in North America, thanks in part to the extended operating voltage of 1,000 Volts. The cable is available in unshielded (P) or shielded (CP) versions.
UNITRONIC ROBUS S/A for sensor/actuator cabling
The new UNITRONIC ROBUS S/A sensor cable is just as resistant. The cable is designed for transmission of signals of sensors and actuators. It extends Lapp's ROBUST family, which already includes control, Ethernet and bus cables. The ROBUST cables from Lapp show their strengths in the food industry, but also in other areas where they are exposed to cleaning agents or bio-oils. The ROBUST material is highly resistant to cold and hot water, with lower water absorption than other materials. The temperature range is -50 to +90°C Celsius in a fixed installation and -40 to +90°C in mobile applications. It is particularly suitable for applications in wet areas and for outdoor applications.
Anti-static cables complying with TRBS 2153
A real treat on the Lapp stand - and an innovation in the cable industry - are anti-static cables. They provide greater safety in locations where sparks caused by static charges can lead to disasters, for example on oil drilling platforms, in refineries or when processing wood or flour. To prevent this danger, Lapp has developed a power supply cable with an anti-static sheath. These cables are already being used on oil drilling platforms belonging to Norwegian service provider Aker Solutions. The composition and production of the sheath material are both patent protected. All that can be revealed is that the sheath is made from a plastic with a special additive that increases conductivity. The Lapp Group is the first manufacturer in the world to offer this kind of anti-static cable. On request, Lapp can supply various cable types with this property.
Source: U.I. Lapp GmbH